Graham sits in the heart of Alamance County with a rich history centered around the courthouse and Main Street, surrounded by homes that range from early 1900s Craftsman cottages to mid-century brick ranches and newer two-story subdivisions. Most of these homes rest on vented crawl spaces raised on brick piers or sit with attics that pull in hot, humid air through the long North Carolina summers, and many carry closed wall cavities with little to no insulation behind the lap siding.
Homeowners in Graham (27253) call Durham Spray Foam Insulation when their cooling bills climb through July and August, when a bedroom or upstairs room refuses to reach temperature, or when they spot condensation and moisture stains in an attic or crawl space. We have served Graham and the surrounding Durham area since 2012, and we understand the specific building challenges that come with this part of Alamance County: the red clay foundation, the humidity that settles in vented spaces, and the older homes with empty wall cavities that can be sealed and insulated without tearing into the siding.
Spray Foam Insulation in Graham (27253)
Graham's housing stock tells the story of the work we do. The historic homes around the courthouse and along Main Street, many built between 1900 and 1930, sit on brick piers above crawl spaces that stay damp year-round. Their attics, if they have been touched at all, often hold flattened batts or loose fill that has settled and lost its R-value, and their walls are empty cavities behind lap siding. The brick ranches and cottages from the 1950s and 1960s have similar problems: original attic insulation that has compressed, vented crawl spaces that sweat with humidity, and rim joists and band joists that leak air and temperature straight into the basement or crawlspace. Newer two-story homes in Graham's subdivisions often have HVAC systems routed through vented attics where temperatures hit 140 degrees on summer afternoons, and many have finished rooms over the garage that never reach the thermostat setting because the attic above them is unconditioned and uninsulated.
Closed-cell spray foam stops that air leakage and moisture infiltration. It seals the rim joist where the house meets the foundation, it fills the empty wall cavities that have been draining heat and cooling for decades, and it creates a conditioned attic that keeps the air handler and ductwork from baking in 140-degree heat. Open-cell foam works well in enclosed attics where moisture control is less critical, and it costs less per board foot. We have been helping Graham homeowners and property managers choose the right foam type and the right application for their specific building since 2012. We bring fully insured crews to every job, and we provide written estimates with R-value and thickness specifications so you know exactly what you are paying for and what the result will be.
Our services in Graham
- Attic Spray Foam Insulation in Graham · Open-cell foam on the roof deck turns a 150°F Durham attic into conditioned…
- Closed Cell Spray Foam Insulation in Graham · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
- Open Cell Spray Foam Insulation in Graham · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
- Wall & Injection Foam Insulation in Graham · Injection foam fills closed walls through small drilled ports, no demolition.
- Crawl Space Spray Foam Insulation in Graham · Closed-cell foam on crawl space walls and rims holds back humid air over Durham…
- Rim Joist & Band Joist Spray Foam in Graham · Rim joists over daylight basements and crawl spaces leak conditioned air at…
- Garage Spray Foam Insulation in Graham · Garage ceilings under bonus rooms are foam-sealed against radiant afternoon…
- Metal Building & Barndominium Spray Foam in Graham · Closed-cell foam is the insulation that stops a Carolina metal building from…
- Commercial & New Construction Spray Foam in Graham · Warehouses; offices; churches; soundstages and production builders served on…
- Insulation Removal in Graham · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
- Insulation Replacement & Re-Insulation in Graham · The full reset: old material removed; gaps air-sealed…
- Air Sealing in Graham · Top plates; can lights; chases; knee walls and attic hatches leak more cooled…
How a Job Works in Graham
We start with a free on-site assessment. You walk us through the spaces that are uncomfortable, damp, or losing energy. We look at your attic, crawl space, rim joists, exterior walls, and any other areas where air and moisture are getting in. We measure, ask questions about your heating and cooling habits, and talk honestly about whether spray foam is the right answer or whether a simpler fix (like blown-in insulation on top of sound attic insulation) makes more sense for your situation.
Once you approve the estimate, we schedule the work. Most Graham homes need at least one day on site. If your attic or crawl space holds old insulation that has gotten wet, contaminated, or has settled beyond recovery, we remove it first and haul it away. Then we set up mechanical ventilation, spray the foam to the thickness and R-value we specified in the estimate, and keep the space vented for the full cure window. We respect your home: we protect floors and fixtures, we keep the work area contained, and we explain the re-entry window (typically 24 to 48 hours for most applications) so you know when the space is safe to occupy again.
On the final day, we clean up, walk through with you, and answer any questions about the work we have done. You get a record of what was sprayed, where, and to what thickness and R-value. That documentation matters if you ever sell the home or file an energy efficiency claim.
Spray foam pricing in Graham depends on the scope of work. Attic foam typically runs from $1.50 per square foot for open-cell foam applied to an attic floor, and closed-cell foam starts at $1.20 per board foot. Wall injection foam for existing closed cavities starts at $2 per square foot. A crawl space encapsulation with closed-cell foam on the walls and rim joists usually begins at $2,500 for a typical Graham home, and rim joist and band joist sealing can start at $650 if it is a small area. If old insulation has to come out first, add $950 or more depending on the volume. Garage foam and metal building applications run from $1.75 per square foot. The exact price depends on how much area needs to be covered, how thick the foam has to be to reach your target R-value, whether we are spraying open-cell or closed-cell, and whether contaminated or failed insulation has to be removed and disposed of first. Call us at (984) 254-5400 for a free estimate. We will measure, specify the foam type and thickness, and give you a firm price before any work begins.
✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Graham and nearby areas.
